Applications
Dispensing & UV Curing Applications
Eight processes, indexed by what you are trying to achieve rather than by what the machine is called. Find your process, or start from your industry.
In short
Technodigm builds systems around the application, not the catalogue. The nine processes below cover protecting a board, bonding and reinforcing components, sealing an enclosure, managing heat, placing very small deposits, and curing adhesive in seconds. Each links to a full process page covering materials, equipment selection and the failure modes worth knowing before you specify. If you know your product but not the process name, the industry pages further down are the better entry point.
8 Core Applications & Processes Across 6 Key Industries
| Process | Electronics / PCB | Medical | Semiconductor | Automotive / EV | Aerospace & Defence | Renewable & Solar |
|---|---|---|---|---|---|---|
| Dot dispensing (solder / silver paste) |
Common - rework, stepped and flex boards |
Common - small, dense assemblies |
Standard - die attach |
Occasional - sensor and module assembly |
Occasional - low-volume, high-mix builds |
Occasional |
| Selective conformal coating | Standard | Common | Rare - handled at package level |
Standard - ECUs and control modules |
Standard | Common - inverters and control boards |
| Underfill | Occasional - BGA-heavy boards |
Occasional | Standard | Common - where thermal cycling is severe |
Common - shock and vibration |
Rare |
| Dam & fill / glob top | Common - chip-on-board |
Common - miniature and disposable devices |
Standard | Occasional - sensor packages |
Common - hybrid assemblies |
Rare |
| Potting & encapsulation | Common - power supplies |
Common - sealed handpieces and probes |
Rare | Standard - ECUs, ignition, charging |
Standard | Standard - junction boxes, inverters |
| Gasketing / FIPG | Common - sealed housings |
Common - devices that get cleaned or sterilised |
Rare | Standard - housings and battery enclosures |
Standard - EMI shielding plus sealing |
Standard - outdoor enclosures |
| Thermal interface materials | Common | Occasional | Common - package to lid |
Standard - battery packs, power electronics |
Common | Standard - inverters |
| Optical bonding | Common - consumer displays, touch panels |
Occasional - monitors and handheld |
Rare | Standard - instrument clusters |
Standard - cockpit and |
Rare - outdoor control |
How to choose
Four questions settle most specifications. If you can answer these, a system can be quoted properly the first time.
What is in the material?
Filler content decides the pump before anything else does. Highly filled and abrasive materials erode standard wetted parts, which is why thermal pastes go to progressive cavity or positive displacement pumps rather than needle valves.
Does it need to touch the part?
Contact dispensing strings and tails on some materials. Jetting breaks the stream before the nozzle lifts, which is the usual answer for cyanoacrylates, silicone grease and primers.
Is it one component or two?
Two-part materials bring pot life into the equipment decision. Ratio accuracy, mix quality and purge behaviour all become part of the specification, and the static mixer is not an afterthought.
How does it cure, and how fast do you need it?
Cure method changes the line, not just the material. UV cure moves parts in seconds but needs line of sight; heat and moisture cure need floor space and time. This is usually where throughput is won or lost.
Equipment across all applications
Systems are built from the same platform set and configured to the process. Full range under Products.
IDS Series Automated Dispensing Systems
Inline dispensing for volume production
GR Series Precision Gantry Robots
Benchtop and low-volume cells
MM3000GP Meter Mix System
Two-part ratio and volume control
LED UVSPOT Curing System
Spot curing of UV adhesives on-line
Why manufacturers work with us
Built and serviced in Singapore
Designed and assembled at our Hillview facility. Spares and service engineers are in-region, not on a flight from Europe or the US.
ISO 9001 certified
Quality management certified with GICG, which matters when your own customer audits your process chain.
Material-first engineering
We test your actual material before quoting a valve. Filler content, viscosity and pot life decide the machine — not the other way round.
Modular and expandable
Systems are configured so a line can be extended later rather than replaced, which is usually the difference between a capex and an opex conversation.
Frequently asked questions
Send us your material and your board
Our engineers will run your actual material on the proposed valve and come back with a configuration, not a catalogue page.
Related reading
Case study
Dispensing abrasive, highly filled pastes
What high filler content does to wetted parts, and how thermal interface materials are handled.