Technodigm Innovation
Technodigm Innovation
Technodigm Innovation

AV300 Auger Valve and Controller

Features
  • Ability to remove the wetted part and be stored safely in a fridge to be re-used hence reducing wastage of material.
  • Consists of various leadscrew sizes for precise dispensing volumes.
  • It does not require high material feed pressure thus reducing built-up pressure.
  • Easy to clean and requires less maintenance.
SHOW MORE


Share this product:

The AV300 auger valve is specifically designed for precision, accuracy, and repeatability. The AV300 is seamlessly integrated with TechnoDigm™ signature dispensing robots, resulting in a holistic dispensing system capable of fulfilling the requirements of applications such as gasketing, dam and fill, as well as component encapsulation.

The AV300 was designed as an economic alternative to the AV200. Driven by a high-quality DC brush motor, the AV300 provides a holistic solution capable of addressing most dispensing requirements. Like all TechnoDigm™ products, the AV300 is designed with maintainability in mind. The wetted component of the AV300 can be dismantled easily and quickly without any tools.

Coupled with the AVC3000 controller, users have fine control over dispensing parameters such as the auger speed, dispensing time, and material pressure.

Operating type DC Servomotor On / Off
Motor output power 8 W, DC24V
Driving torque Max 0.189 Nm
Material inlet pressure 0.1 bar to 2 bar
Motor rotational speed 30 to 300 rpm
Dispense time interval 0.1 to 9999 second
Viscosity range Medium (30k cps) to High (500k cps)
Material inlet Female Luer Lock Connector (standard)
Operating temperature 20 ~ 40°C
Controller Technodigm AVC3000
Weight 520g
Type of feed screw 8 pitch and 16 pitch
Maximum dispense rate Maximum dispense rate for high viscous material (500k cps) is 6mg/sec using 8 pitch leadscrew
Type of material used
Auger chamber Hardened Stainless Steel
Leadscrew Hardened Stainless Steel
Thrust bearing Turcite X
O-ring Perfluorocarbon


RETURN TO TOP