Welcome to TechnoDigm Innovation
SCS4000 Selective Conformal Spray Coating System
Standard Features
- Low Atomising Pressure
- Purge & Dipping Stations
- Low Incoming Air Pressure Sensor
- Material Low Level Sensor
- Single Stage Chain Conveyor
- Blacklight
Optional Features
- Tilt & Rotate
- Digital Camera for Fiducial Recognition
- Dual Head
- Dual Lane Conveyor
- Loader / Unloader
- 3 Stage Conveyor (Auto)
Technodigm™ Selective Conformal Spray Coating System is a programmable selective coating system that allows you to dispense only on required areas to reduce cycle time and eliminate the need for masking. It comes with various types of spray heads to cater to different coating material and spraying profile.
Selective Conformal Spray Coating System SCS4000 is an efficient machine for applying conformal coatings for various applications. It improves productivity by allowing the selective coating of areas without the need for time consuming masking. Quality of spray is repeatable and coating can be applied especially thin or thick.
Proprietary Software
SCS4000 is a fully programmable selective coating system with a user-friendly proprietary software to perform any intricate patterns that is needed for a good coating process. It also has a programmable tilt and rotate function to access most areas. Together with the gantry system and the spray valve, the system can deliver an even coated area with a maximum of approximately 0.01mm*.
Friendly features for area coating allows for fast programming. Dry runs after programming allows user to check position without actual spraying. Valves are easy to service and maintain. There is no expensive replacement part.
| Unit | IDS2034 | IDS2054 | |
| Number of Axis | – | 3 Axis | 3 Axis + R axis + U Axis |
| X, Y & Z Axis Travel Range | mm | 400 x 500 x 200 | 400 x 500 x 200 |
| Effective Dispense Area with Vision Camera Mounted |
mm | 300 x 300 x 200 | 300 x 300 x 150 |
| Mounted Load Capacity | kg | 6 | |
| Maximum Speed, c/w S-curve jerk control | mm/sec | X & Y Axis: 500 Z Axis: 250 |
X & Y Axis: 500 Z Axis: 250 (R Axis: 720°/sec) |
| Repeatability | μm/axis | X, Y & Z Axis: ± 10 | X, Y & Z Axis: ± 10 R Axis: ± 0.01° |
| Resolution | μm/axis | 1 | |
| Vision System FOV | mm | 9.6 x 7.2 (1 pixel =8 μm) | |
| Program Capacity | – | Unlimited. Depend on hard disk capacity | |
| Data Memory Type | – | Hard disk | |
| Operating System | – | Windows 10 Professional | |
| Drive System | – | AC servo motor + Precision Grade Ball Screw | |
| Motion Control | – | PTP (Point to Point) & CP (Continuous Path) | |
| Linear / Circular Interpolation | – | XYZ Interpolation | |
| Teaching Method | – | Direct teaching by using the Needle or Camera. Manual data input. Direct import from dxf files |
|
| External I/O | – | USB, RS232 & Ethernet | |
| Power Supply | – | 3 wires single phase, 220-240 VAC 50/60 Hz 13 A | |
| Air Supply / Flow Rate | kPa | 500 (5 bar, 72 psi), 100 l/min | |
| Dimension (WxDxH)* | mm | 900 x 1150 x 1800 | 900 x 1150 x 1800 |
| Weight | kg | 475 | 482 |
*Exclude keyboard, monitor mounting stand, and stand light tower
**Estimated Weight
Conveyor Board Handling Specifications
| Unit | IDS2034 | IDS2054 | |
| Conveyor Type | – | Flat Belt with Motor-driven Width Adjustment, SMEMA Compliant | |
| Edge Clearance | mm | 5 | |
| Min. Conveyor Width | mm | 50 | |
| Above Board Clearance | mm | 60 | |
| Under Board Clearance | mm | 40 | |
| Transport Height | mm | 913 – 965 | |
| Mode of Operation | – | Automatic, Manual or Bypass | |
| Max. Load Capacity | kg | 2 | |
