Technodigm Innovation
Technodigm Innovation
Technodigm Innovation

Spool Valve

  • Adjustable suck-back control
  • Easy to clean and maintain
  • Able to use various types and sizes of dispensing needles
  • Compatibility with most standard fluid packages and delivery systems
  • Stainless steel wet body

Spool Valve

Share this product:

TechnoDigm™ SPV200 is a pneumatic valve that has been designed specifically to address dripping and tailing issues effectively. The internal design creates a suck-back effect as opposed to standard piston valves. The suck-back feature greatly increases accuracy and repeatability when dispensing materials. This feature prevents droplets from remaining on the dispensing tip when using lower viscosity fluids. This feature also enables the user to control the amount of suck-back via an adjustment knob on top of the valve. It is an effective valve for dispensing medium to high viscosity epoxies and adhesives such as RTV, grease, gasketing epoxies, and high viscosity sealant. The stainless steel body allows the valve to be used for any kind of material even those corrosive types.

Operating Air 5.0 bar
Maximum Fluid Pressure 7.0 bar
Material Inlet Metal Female Luer or Compression fitting
Material Outlet Male Luer Adaptor to 1/4″-28 UNF
Suck-back Stroke 1 mm (Max. 2 turns)
Flow Rate 5.0 l/min
Actuator Body Stainless Steel
Wetted Chamber Stainless Steel
Cycle Rate Exceeds 400 cycles/min
Range of Temperature 5 ~ 50 °C
Weight Approximate 280g