Spray Valve and Controller

SV300 & SVC1000

Features of Valve

  • Suitable for low viscosity fast-drying conformal coating
  • Low atomizing air requirement
  • Fine adjust of coating material through a micrometer
  • Compact Design, easy maintenance
  • Extended nozzle

Features of Controller

  • User-friendly software provides simple setting of all the necessary parameters
  • LCD display screen
  • Microprocessor control
  • Easily integrated into any coating system
  • No maintenance needed
Spray Valve

SV300 series is an air atomizing Spray Valve. It utilizes low air pressure to break coating materials into tiny droplets and deposit it onto any coating surfaces. Atomizing pressure can be as low as 8 psi. This will ensure that coating material hitting the coating surfaces will not “bounce’ or blown off the intended coating area. The valve comes with an extended nozzle for dipping into a solvent to prevent drying out of coating material. Any cleaning or flushing is only on the extended nozzle assembly.

Spray Valve Controller

SVC1000 is a dedicated controller for spray valves. It has a comprehensive range of features for good control of the spraying parameters. It is micro-P driven and can be easily integrated onto any existing system.

Model No. SV300 SV301 SV302
Valve type Spray valve (Wide Area) Spray valve (Narrow Path) Spray valve (Narrow Path)
Operating Air Pressure 4 bar to 6 bar 4 bar to 6 bar 4 bar to 6 bar
Atomizing Air Pressure ≤ 2 bar ≤ 3 bar ≤ 3 bar
Fluid Delivery Pressure Max 7.0 bar Max 5.0 bar Max 5.0 bar
Minimum Spray Area (Diameter) 20 mm 6 mm 6 mm
Maximum Spray Area (Diameter) 60 mm 16 mm 16 mm

 

Driving part materials
Cylinder Body Aluminium Aluminium Aluminium
Cap Aluminium Aluminium Aluminium
Cap Piston SUS304 Stainless Steel SUS304 Stainless Steel SUS304 Stainless Steel
Check Body SUS304 Stainless Steel SUS304 Stainless Steel SUS304 Stainless Steel

 

Wetted part materials
Chamber Stainless steel  Stainless steel  Stainless steel
CAP, CV body Stainless steel  Stainless steel  Stainless steel
Seals Teflon Teflon Teflon

 

Connecting ports
Operating Air Inputs M5 thread w/ push-in fitting for 6mm OD tube M5 thread w/ push-in fitting for 6mm OD tube M5 thread w/ push-in fitting for 6mm OD tube
Material Inlet 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT
Material Outlet N/A N/A Lock Nut
Weight 360 g 360 g 360 g

 

SVC1000 Controller
Power 120/220VAC
Air Pressure Range Max. 6.0 kgf/cm2
Spray Pressure 0 – 2 bar
Valve Operating Pressure Max 6 bar
Dispensing Time Range Up to 99.99 sec
Valve, Operating Time Up to 99.99 sec
Interval Time Up to 99.99 sec
Operating Mode Timer / Auto Mode, Manual mode, Interval mode
Weight Approx. 4.0 Kg