UVL2424 All In One LED UV Curing System

Features

  • 400 LEDs
  • Convenience and ease of use
  • Accommodate small to very large substrate
  • Accommodate various curing distances without fixturing
  • Easy setting of parameters via HMI
  • Stable UV intensity

UVL2424, all-in-one LED UV Curing System is a benchtop UV Chamber System that combines a UV chamber, touchscreen panel, and operating system in a compact design. The UV Chamber also features 400 LEDs that offer homogeneous intensity distribution. This system is designed for rapid curing of light activated adhesives and coatings and is suitable for laboratory or low volume production environments.

With this system, you can achieve a variety of peak intensity and curing areas to meet your specific needs, and choose from wavelengths of 365, 405 or 420 nm.

LED UV Head
Available LED Wavelength 365nm (405nm, 420nm optional)
UV Intensity (at 10mm) 500mW/cm² (Maximum) UVA
Curing Area 240 x 240mm
Cooling System DC Axial Fans
Operating Mode Auto & Manual
Curing Time 0 – 999.99 seconds
Setting HMI
Power 110-240V, 10A, 50-60Hz
Connection Foot Pedal, I/O 12 Pin Port
Weight 54kg
Overall Dimension (L x W x H) 500 x 460 x 734 mm

 

UV Sensor and UV Read (Optional)
Spectral Range UVA Range
Intensity Range 20 mW/cm² – 10 W/cm²
Detection Resolution 1 mW/cm²
Accuracy +/- 5%
Calibration Requirement 1 Year Recommended
Sensor Operating Temperature < 80°C
Data-Logger Port RS232
Light Source Selection UVA Broadband or LED 365 nm