UVRead-S

Features / Benefits

  • IMRE, A*STAR unique patented technology
  • Ensure efficiency of UV Curing System
  • With the ability to connect and read on a laptop, it is easily accessible
  • Longer calibration validity (2 years) resulting in lower running cost

UVRead-S

It comprises a sensor module with a set of detachable standard light-guide adaptors for diameters of 3, 5 and 8 mm, and a reader module connecting to the former for the display of the measurement.

High Performance UV Intensity Measurement Radiometer

UVRead is a high-performance radiometer designed for quantitative measurement of high intensity UVA, such as the UV spot-light used for industrial epoxy curing. This allows accurate measurements and monitoring of the UV intensity of a curing system. The UVRead measures UV intensity measurement up to 12 W/cm².

Additional benefits of the UVRead include its high durability and longer calibration validity (2 years). This results in a lower running cost and minimizes disruption.

Patented Technology

UVRead was developed through the technical collaboration between TechnoDigm™ and Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR).

Based on a unique patented IMRE ferroelectric photovoltaic UV sensor technology, UVRead is built for durability and efficiency.

It has gone through numerous rigorous testing and has the ability to withstand continuous intense UV exposure over a long period of time without exhibiting any significant performance degradation.

Technical
Power Source 9V Alkaline Battery or 9V Power Adaptor
Data-Logger Port RS232
Light Guide Diameter (in mm) 3, 5 and 8
Light Source Selection UVA Broadband or LED 365 nm
Case materials Aluminium
Auto-shutdown 2.5 min (Selectable)
Dimensions (cm) 12.9 (L) x 9.1 (W) x 2.8 (H)
Sensor Module
Dimensions (cm)
5.6 (L) x 3.8 (W) x 9.0 (H)

 

Performance
Spectral Range Full UVA Range (315 – 380 nm)
Intensity Range 20 mW/cm² – 12 W/cm²
Detection Resolution 10 mW/cm²
Accuracy +/-5% Typical, +/- 10% Maximum
Calibration Requirement 2 Years Recommended
Operating Temperature 0 – 80 °C